;
Blackfly USB3
Support Center

Blackfly USB3

Go to Product Details Page

For Support
Please call +49 7141 488817-0 or click here for support

For Service
Submit RMA

Overview:
Software / Firmware

Spinnaker SDK Download

Learn more
Knowledge Base

When does a change to a camera setting take effect?

Read the Story
Knowledge Base

Which sensor is used on my camera?

Read the Story
Knowledge Base

Windows 8.1 users may experience crashes with a GigE filter driver while in low power mode

Read the Story
Knowledge Base

Windows Firewall may disable GigE network

Read the Story
Application Note

Getting Started with Matrox Imaging Library

Read the Story
Application Note

Getting Started with MVTec HALCON

Read the Story
Application Note

Getting Started with NI Vision Builder for Automatic Inspection

Read the Story
Application Note

Getting Started with NI-MAX and LabVIEW

Read the Story
Application Note

Storing Data in On-Camera Flash Memory

Read the Story
Application Note

Streaming Cameras on Embedded Systems

Read the Story
Application Note

Using Cognex VisionPro with FLIR GigE Vision Machine Vision Cameras

Read the Story
Resources:
Blackfly USB3 Datasheet
Download
Blackfly USB3 Drawings
Download
Blackfly USB3 Firmware
Download
Blackfly USB3 Getting Started Manuals
Download
Blackfly USB3 Imaging Performance Specification
Download
Blackfly USB3 Product Change Notification
Download
Blackfly USB3 Technical Reference Manuals
Download
Software Download: Spinnaker SDK
Download
Software Download: Flycapture2 SDK
Download
Specifications
Overview
Readout Method
Global shutter
Required Accessories
Lens, Cable, Host Adapter (USB 3.1 Gen 1), Tripod Mount Adapter (ACC-01-0003)
Compliance & Certifications
Compliance
CE, FCC, KCC, RoHS. The ECCN for this product is: EAR099.
Machine Vision Standard
USB3 Vision v1.0
Warranty
3 years
Environmental
Operating Humidity
20 to 80% (no condensation)
Operating Temperature
0° to 45°C
Storage Humidity
20 to 95% (no condensation)
Storage Temperature
-30° to 60°C
Features
Flash Memory
1 MB non-volatile memory
Image Buffer
16 MB
User Sets
2 user configuration sets for custom camera settings
Partial Image Modes
Pixel binning, decimation, ROI
Physical
Mass
36 grams
Interface
USB 3.1 Gen 1
Opto-isolated I/O Ports
1 input, 1 output
Dimensions [W x H x L]
29 mm × 29 mm ×30 mm
Power
Power Requirements
5-24 V via GPIO or 5 V via USB3
Recommended System Configuration
Hard Drive
200 MB hard drive space
Port
USB 3 Port
Operating System
Windows or Linux (32-bit or 64-bit)
CPU
3.1 GHz or equivalent CPU