Agentase C2
Support Center

Agentase C2

Go to Product Details Page

For Support
Please call (877) 692-2120 or click here for support

For Service
Submit RMA

Datasheet: FLIR Agentase C2 Datasheet
System Overview
Application Time
Handheld Applicator: 30 seconds / m2 Backpack Applicator: < 3 minutes / HMMWV Cart-Based Applicator: <3 minutes / HMMWV
Training Requirements
< 1 hour; no special skills required
Cold Weather Additive
Lowers operating temp of nerve agent and training formulations to -4 °F (-20 °C)
Life Expectancy
12 hr operational pot-life once prepared; 8 hrs at 104 °F (40 °C ); shelf-life >3 yrs when stored below 77 °F (25 °C)
Operating Conditions
The response must be read under white light (standard) or UV-light (fluorescent additive and forensic version)
Operating Humidity
Operating Temperature
Nerve agent and training formulation: 32 to 113 °F (0 to 45 °C); blister agent formulation: 23 to 113 °F (-5 to 45 °C)
Storage Temperature
Store at room temp out of direct sunlight; product expiration is indicated by temp-time indicator on packaging
Dispose in accordance with local policies for non-hazardous aqueous waste
Water Source
Handheld applicator: water included; large-scale consumable:tap water ≤250 ppm calcium carbonate and treated for chlorine (chlorine treatment included)
Physical Features
Setup Time
Handheld Applicator: < 5 minutes Large-Scale Consumable Kit: < 15 minutes
Spray Volume
Handheld Applicator: 0.5L Large-Scale Consumable Kit: 2 Gal
Surface Compatibility
Large variety of materials, won't degrade sensitive surfaces
Surface Coverage
Handheld Applicator: 5-7m2 Large-Scale Consumable Kit: 75 -12 0m2, 2-3 HMMW Vs
Weight [Full]
Handheld Applicator: Max 1.2 lbs (0.54 kg) Large-Scale Consumable Kit: 2.6 lbs (1.2kg)
Cold Start Time
< 3 mins
Handheld Applicator: N/A Backpack Applicator: Compressed air, 4000 psi SCBA or hand powered versions available Cart-Based Applicator: Compressed air, 4000 psi SCBA, 120 psi compressor, LMTV compatible
Sampling & Analysis
Sample Introduction
Spray directly onto surface
Sample Phase
Surface-based detection
Sampling & Analysis
Detection within 5 mins
Enzyme formulations include: nerve agent (V- & G-series) and blister agent (HD); training disclosure spray also available
System Interface
Fluorescent Additive
Enhances visual response of standard spray under challenging lighting conditions or surfaces when used with UV-light
Display and Alerts
Colorimetric sensor response; Standard nerve agent and training spray is yellow when applied to a surface and surface changes to red within 5 mins if contaminated; blister agent spray is applied red and changes to yellow if clean but stays red if contaminated; forensic spray is translucent when applied and contamination is visible under UV-light