The FLIR Universal Flex Current Probe accessories are designed to add capabilities, simplify challenges, and get the best readings with your existing meter. Made with a narrow flexible coil clamp, the TA72 and TA74 let you easily take measurements in tight or awkward spots — a difficult task with a traditional hard jaw clamp meter. The connection is a standard banana plug and the output is a voltage signal, so it’s compatible with most DMMs and clamp meters, regardless of brand.
Snake the flexible coil clamp around obstacles with ease, even in deep, crowded cabinets. Measure multiple conductors and targets with limited clearance, and switch between 30A, 300A, and 3000A AC current range based on your needs.
Compatible with most DMMs and clamp meters, regardless of brand, the TA72 & TA74 add 3000A AC current measurements to existing meters.
Made with bright, dual-LED worklights to illuminate dark cabinets, built to withstand a 3-meter drop, portable and lightweight, the TA72 and TA74 were designed with your convenience in mind.
Snake the coil around obstacles and multiple conductors with ease – even in deep, crowded cabinets – and get accurate measurements.
30A, 300A, 3000A
Compatible with most meters
Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets
Built to withstand a 3-meter drop
Limited Lifetime Warranty with registration
|Maximum AC current||3000A|
|AC current ranges and resolution||30.00A, 300.0A, 3000A|
|Basic AC current accuracy (full scale)||± 3.0% + 5 digits|
|Measurement Rate||1.5 samples per second, nominal|
|AC current bandwidth||45Hz – 500Hz (sine wave)|
|Positional error (distance from optimum)||0.6" (15mm) ± 2.0%
1.0" (25mm) ± 2.5%
1.4" (35mm) ± 3.0%
|1.4” (35mm) ±1.0%
2.0” (50mm) ±1.5%
2.4” (60mm) ±2.0%
|Minimum requirements for meter compatibility with TA72||AC voltage function 4000 count display 1mV resolution|
|Max conductor diameter capacity||2.4" (6cm)||4.7" (12cm)|
|Flex coil length||10" (25 cm)||18" (45 cm)|
|Flex coil diameter||0.3” (7.5mm)|
|Flex coil tip diameter||0.5” (13mm)|
|Probe length||73" (1.9m)|
|Work light||Two white LEDs|
|Power supply||(2) 1.5V “AAA”|
|Drop test||9.8' (3m)|
|Agency approvals||CE, UL|
|Safety rating||CAT IV 600V,CAT III 1000V|
|Standards||EN61010‐1, EN61010‐2‐032, EN61326-1|
|Warranty||Limited lifetime with registration|
Call 1-866-477-3687 to chat with a knowledgeable specialist.
All products are FLIR Factory Certified and come with a full warranty.